Many a painting company in Austin today use airless sprayers to paint a fence. Airless sprayers give you the ability to color every area in an even manner. However, a painter in Austin should not forget to back brush or remove all the dirt on the fence before staining. In this article, we will be considering what techniques an Austin residential painting contractor may use when staining your fence.

Choose your paint

Firstly, before an Austin residential painting contractor can actually start painting, you have to first select the stain or paint that you would like to use for this project. It is important for you to consider the different color schemes that would fit the whole residence.

First, select the stain or paint you would like to use for this project. It is critical for you to pick the right color stains.

Prepare the fence for paint

Carefully power wash the wood ensuring that you do not damage it, while at the same time leaving it spotless. Many times cleaners bought over the counter end up being a nuisance. Such filters do not necessarily reduce the time spent on washing and cleaning because you constantly have to take breaks now and then. An Austin painting contractor usually dissolves TSP in warm water mixed with a given amount of detergent.

The amount of stain worth applying with the airless sprayer

Since the amount you apply is imperative, use a sufficient amount that will not remain or drip from the wood. The stain is mainly supposed to get absorbed into the wood, and nor drop off or stay on the rail, especially when dealing with a stain that is lowly viscous. For a shiny reflective layer, consider using clear coat instead of transparent stain. Semitransparent stains have the possibility of cracking when it fails. However, add the amount of stain to dry it off, but not too much as it would drip.

Spraying the boards

Make an effort to spray the whole area without pausing. While at it, angle your spray too many different angles to enable you to access every edge boards. Ensure you brush carefully each board fence from one end to the other for the best and appealing results. For you to avoid worrying about staining your house, it is appropriate that you mask the house at least five feet with plastic.

Back brushing stain

Dye needs proper attention and works deep into every crack. For any reason that you are not able to reach these areas before it dries up, consider adding more stain until you achieve this. Drive your concentration towards areas with easy access before the stain dries off. Some areas face direct sunlight while other face away from light. These are the factors to consider even before the whole back brushing process begins.

Best weather and time to apply stain

The application of stain needs precise and keen timing of weather conditions. Avoid working during the rainy seasons at all costs. In addition to this, hot weather is not appropriate for the application of stain as it brings about the heating of stain. Reconsider working in extremely humid conditions with humidity levels above 85 degrees. The best time to begin working on staining your fence is early morning hours when the humidity ranges between sixty and seventy degrees.

The Painting Pro Guys Austin would love to help you with your upcoming painting project! Call the best Austin residential painting contractor today and ask for a FREE quote!