How Professional Austin Commercial Painters Clean The Paintbrushes
There are two types of paintbrushes used by Austin commercial painters, each used in different scenarios. However, no matter what type of brush is used, it is always important to have these cleaned because painting equipment is expensive and should not be wasted.
Paintbrushes can either be synthetic or natural. Synthetic-bristle brushes are recommended for water-based latex paints while natural-bristle brushes are preferred for oil-based alkyd paints.
For water-based paintbrushes, the buildup on the synthetic bristle brush calls for the Austin commercial painter’s favorite, the Krud-Kutter, which easily removed latex paint that dried on the brush.
A jar and two paint thinners is a series of the minimal approach to cleaning the natural bristle brushes. A tablespoon of the thinner in a jar coupled with the thorough working of the brush through works a great deal. Empty the dirty thinner into another can of its own. The liquid thinner held up in the brush squeezed out gently until the brush is clean. The brush is after that, is dipped and worked thoroughly in the jar, once again pressed and the process repeated until the liquid coming out of the brush is clean. Synthetic bristles cannot take as much beating as the natural bristles.
Paint thinners melt most plastics and are thus not recommended by professional Austin painting contractors. Mark one of the jars and marble arranged at the bottom for working the brush. For the oil-based brushes, sticking in and mixing does not work. For desperate measures, the crumbled window screen pieces can also do the job, but the main disadvantage is that it happens to be hard on bristles.
Detergent soaps are not recommended by a professional Austin commercial painter. A chemically designated and real soap does the job especially those with fat or oil as additives. Use a cellulose sponge to work up the brush across it or against the palm. Rinsing helps reduce the chances of paint sticking on the sinks or back patios. Doing this leads natural wearing put off the brush and not get to dump them away sooner than expected.
The idea is also applicable to synthetic brushes. Leaving of soap on the bristles contaminates the paint in the subsequent painting job. The result is a bad color film. Some colors happen to be very exotic and such needs nitrite gloves as well as a respirator. For a hydrocarbon-based paint, a fat soap works well. Acetone kills brushes first and hence a best practice is necessary for its use. Once again, soap is preferred, as the bristles need conditioning.
Looking for a good Austin house painter to trust your painting job with? Call the Painting Pro Guys Austin today!
Leave a Reply